OE Oil Heater
Sectors
- Energy
- Engine
Product Categories
HOTSTART lube oil heaters thread into the engine’s oil pan to keep the oil warm. When cold, oil becomes very viscous and may not protect engine components. Upon start-up, warm oil is supplied to the critical wear points in the engine. This reduces engine wear and allows easier starts which prolong battery life.
These heaters, available in various AC voltages as well as 12 and 24 volt DC, range from 75 to 500 watts. The OE series of heaters are for hazardous location engine applications and come without a thermostat.
If heating gear oil (medium weight viscosity), HOTSTART recommends using low watt density heaters.
Can be used in hazardous locations.
Heating Information
Primary Heating
- Lubrication Oil
- Gear Oil
Primary Heat Power
- 125 W
- 150 W
- 225 W
- 265 W
- 300 W
- 375 W
- 400 W
- 500 W
Power Specifications
Power Sources
- AC, Three-Phase, 50/60 Hz
- AC, Single-Phase, 50/60 Hz
Voltages
- 120
- 208
- 240
- 277
- 380
- 480
- 575
Power Connectors
- Hardwired
Mount Types
- Threaded
Certifications
- CSA
Related Products
HOTSTART’s OSE (UL C/US listed; Class 1, Div. 2, Group D, T3 or Class 1, Zone 2, Group IIA T3 depending on configuration) is a compact oil heating system for use in North American hazardous…
HOTSTART’s explosion proof BB Breaker Box is capable of providing a disconnection point and overcurrent protection when paired with HOTSTART hazardous location heating systems for oil and gas…
HOTSTART’s EE heaters are hazardous location approved systems available in both single and three phase configurations that are hard wired into the main electrical system. The EE series features the…
HOTSTART lube oil heaters thread into the engine’s oil pan to keep the oil warm. When cold, oil becomes very viscous and may not protect engine components. Upon start-up, warm oil is supplied to the…
The OLE model (UL C/US listed; Class 1, Div 1, Group D T3 or Class 1 Zone 1 Group IIA T3 depending on configuration) is HOTSTART’s largest capacity oil heating system designed for use in North…
The CLE model (UL C/US listed; Class 1, Div 1, Group D T3 or Class 1 Zone 1 Group IIA T3 depending on configuration) is HOTSTART’s large capacity coolant heating system designed for use in North…
The OCLA model (IECEx certified) is HOTSTART’s largest capacity combination coolant-oil heating system designed for use in hazardous location applications. Its combination of heating power options…
The OLA model (IECEx certified) is HOTSTART’s largest capacity oil heating system designed for use in hazardous location applications. Its combination of heating power options (up to 24 kW) and pump…
The CLA model (IECEx certified) is HOTSTART’s large capacity coolant heating system designed for use in hazardous location applications. Its combination of heating power options (up to 66 kW) and…
HOTSTART’s CSE (UL C/US listed; Class 1, Div. 2, Group D, T3 or Class 1, Zone 2, Group IIA T3 depending on configuration) is a compact coolant heating system for use in North American hazardous…
HOTSTART's OCSE (UL C/US listed; Class 1, Div. 2, Group D, T3 or Class 1, Zone 2, Group IIA T3 depending on configuration) is a compact combination oil and coolant heating system for use in North…