OLE Oil Heating System Hazardous Location
The OLE model (UL C/US listed; Class 1, Div 1, Group D T3 or Class 1 Zone 1 Group IIA T3 depending on configuration) is HOTSTART’s largest capacity oil heating system designed for use in North American hazardous location applications. Its combination of heating power options (up to 24 kW) and pump power give it the capability to handle the largest engine heating applications. Its pre-packaged, plate-mounted configuration allows the heating system to be installed on the skid for operator access and its remote automatic function and customer interface connections simplify integration into an existing control system.
To improve equipment startability and availability, the OLE continuously circulates heated oil throughout the oil sump or lubrication system, maintaining a uniform and consistent temperature to ensure oil viscosity is at optimal levels for engine or compressor protection. Continuous lubrication of the compressor frame, bearings and crossheads with heated oil minimizes wear and tear, reducing overall maintenance. The OLE delivers the required flow to achieve pressure permissives for startup, eliminating the need for a separate prelube pump, motor and controller.
In oil and gas applications, improving equipment availability and maintaining system readiness are critical factors in reducing expenses and improving the bottom line. In cold climates, HOTSTART heating systems ensure immediate startup on demand even in freezing temperatures. In warm, humid climates, HOTSTART systems maintain equipment above the dew point, eliminating the risk of condensation forming inside the oil sump or pan.
Can be used in hazardous locations.
Heating Information
Primary Heating
- Lubrication Oil
Primary Heat Power
- 2.5 kW
- 6 kW
- 9 kW
- 12 kW
- 18 kW
- 24 kW
Power Specifications
Power Sources
- AC, Single-Phase, 60 Hz
- AC, Three-Phase, 60 Hz
Voltages
- 208
- 240
- 480
- 575
Power Connectors
- Hardwired
Temperature Control
Primary Temperature Control
- 32–176°F (0–80°C), adjustable
Primary Temperature Control Set Points
- 105°F (40°C), factory set
Primary High Limit Temperature
- 195°F (90°C)
Mount Types
- Plate
Inlets / Outlets
Inlets
- Determined by flow rate
Outlets
- 1” NPT
Ingress Options
Control Box Ingress
- NEMA 4, 7, 9
Certifications
- UL-C / US listed
Related Products
HOTSTART’s OSE (UL C/US listed; Class 1, Div. 2, Group D, T3 or Class 1, Zone 2, Group IIA T3 depending on configuration) is a compact oil heating system for use in North American hazardous…
HOTSTART’s explosion proof BB Breaker Box is capable of providing a disconnection point and overcurrent protection when paired with HOTSTART hazardous location heating systems for oil and gas…
The OCLE model (UL C/US listed; Class 1, Div 1, Group D T3 or Class 1 Zone 1 Group IIA T3 depending on configuration) is HOTSTART’s largest capacity combination coolant-oil heating system designed…
HOTSTART’s EE heaters are hazardous location approved systems available in both single and three phase configurations that are hard wired into the main electrical system. The EE series features the…
HOTSTART lube oil heaters thread into the engine’s oil pan to keep the oil warm. When cold, oil becomes very viscous and may not protect engine components. Upon start-up, warm oil is supplied to the…
The CLE model (UL C/US listed; Class 1, Div 1, Group D T3 or Class 1 Zone 1 Group IIA T3 depending on configuration) is HOTSTART’s large capacity coolant heating system designed for use in North…
The OCLA model (IECEx certified) is HOTSTART’s largest capacity combination coolant-oil heating system designed for use in hazardous location applications. Its combination of heating power options…
The OLA model (IECEx certified) is HOTSTART’s largest capacity oil heating system designed for use in hazardous location applications. Its combination of heating power options (up to 24 kW) and pump…
The CLA model (IECEx certified) is HOTSTART’s large capacity coolant heating system designed for use in hazardous location applications. Its combination of heating power options (up to 66 kW) and…
HOTSTART’s CSE (UL C/US listed; Class 1, Div. 2, Group D, T3 or Class 1, Zone 2, Group IIA T3 depending on configuration) is a compact coolant heating system for use in North American hazardous…
HOTSTART's OCSE (UL C/US listed; Class 1, Div. 2, Group D, T3 or Class 1, Zone 2, Group IIA T3 depending on configuration) is a compact combination oil and coolant heating system for use in North…