Back to Product Search

OSE Oil Heating System Hazardous Location

Sectors

  • Energy
  • Engine

Product Categories

A UL C/US certified compact oil heating system designed to maintain an engine’s optimal oil viscosity for North America-front view.
A UL C/US certified compact oil heating system designed to maintain an engine’s optimal oil viscosity for North America-rear view.

HOTSTART’s OSE (UL C/US listed; Class 1, Div. 2, Group D, T3 or Class 1, Zone 2, Group IIA T3 depending on configuration) is a compact oil heating system for use in North American hazardous locations and is designed to maintain an engine or compressor’s optimal oil viscosity for gas compressor or offshore equipment applications. To improve startability and availability, the OSE continuously circulates heated oil throughout the oil sump or lubrication system, maintaining a uniform and consistent temperature to ensure oil viscosity is at optimal levels for engine or compressor protection.

Continuous lubrication of the compressor frame, bearings and crossheads with heated oil minimizes wear and tear, reducing overall maintenance. The OSE delivers the required flow to achieve pressure permissives for startup, eliminating the need for a separate prelube pump, motor and controller. Designed as a user-friendly, pre-packaged system, the OSE includes all necessary components and features a foot-mounted configuration to reduce overall footprint. Its remote automatic function and customer interface connections enable the OSE to be easily integrated into any control system.

In oil and gas applications, improving equipment availability and maintaining system readiness are critical factors in reducing expenses and improving the bottom line. In cold climates, HOTSTART heating systems ensure immediate startup on demand even in freezing temperatures. In warm, humid climates, HOTSTART systems maintain equipment above the dew point, eliminating the risk of condensation forming inside the oil sump or pan.

Can be used in hazardous locations.

Heating Information

Primary Heating

  • Lubrication Oil

Primary Heat Power

  • 1.5 kW
  • 2.5 kW
  • 4 kW

Power Specifications

Power Sources

  • AC, Single-Phase, 60 Hz
  • AC, Three-Phase, 60 Hz

Voltages

  • 208
  • 240
  • 480
  • 575

Power Connectors

  • Hardwired

Temperature Control

Primary Temperature Control

  • 32–176°F (0–80°C), adjustable

Primary Temperature Control Set Points

  • 105°F (40°C), factory set

Primary High Limit Temperature

  • 195°F (90°C)

Mount Types

  • Foot

Inlets / Outlets

Inlets

  • Determined by flow rate

Outlets

  • 1” NPT

Ingress Options

Control Box Ingress

  • NEMA 4, 7, 9

Certifications

  • UL-C / US listed

Related Products

Capable of providing a disconnection point and overcurrent protection when paired with hazardous location heating systems

HOTSTART’s explosion proof BB Breaker Box is capable of providing a disconnection point and overcurrent protection when paired with HOTSTART hazardous location heating systems for oil and gas…

read more

Hotstart’s largest capacity UL C/US combination heating system designed  for hazardous locations in North America.

The OCLE model (UL C/US listed; Class 1, Div 1, Group D T3 or Class 1 Zone 1 Group IIA T3 depending on configuration) is HOTSTART’s largest capacity combination coolant-oil heating system designed…

read more

Hazardous location approved systems that are hard wired into the main electrical system.

HOTSTART’s EE heaters are hazardous location approved systems available in both single and three phase configurations that are hard wired into the main electrical system. The EE series features the…

read more

Hotstart's lube oil heaters thread into the engine’s oil pan to  keep the oil warm.

Hotstart lube oil heaters thread into the engine’s oil pan to keep the oil warm. When cold, oil becomes very viscous and may not protect engine components. Upon start-up, warm oil is supplied to the…

read more

Hotstart’s OLE is the largest capacity UL C/US oil heating system designed for hazardous locations in North America.

The OLE model (UL C/US listed; Class 1, Div 1, Group D T3 or Class 1 Zone 1 Group IIA T3 depending on configuration) is HOTSTART’s largest capacity oil heating system designed for use in North…

read more

UL C/US Systems designed for hazardous locations and designed to handle the largest engine heating applications.

The CLE model (UL C/US listed; Class 1, Div 1, Group D T3 or Class 1 Zone 1 Group IIA T3 depending on configuration) is HOTSTART’s large capacity coolant heating system designed for use in North…

read more

Hotstart’s largest capacity combination, IECEx oil & gas heating system designed for hazardous locations.

The OCLA model (IECEx certified) is HOTSTART’s largest capacity combination coolant-oil heating system designed for use in hazardous location applications. Its combination of heating power options…

read more

Hotstart’s OLA is the largest capacity IECEx oil heating system designed for hazardous locations.

The OLA model (IECEx certified) is HOTSTART’s largest capacity oil heating system designed for use in hazardous location applications. Its combination of heating power options (up to 24 kW) and pump…

read more

IECEx systems designed for hazardous locations and designed to handle the largest engine heating applications.

The CLA model (IECEx certified) is HOTSTART’s large capacity coolant heating system designed for use in hazardous location applications. Its combination of heating power options (up to 66 kW) and…

read more

A compact UL C/US heating system for use in North America to maintain  optimal engine temperatures-front view shown.

HOTSTART’s CSE (UL C/US listed; Class 1, Div. 2, Group D, T3 or Class 1, Zone 2, Group IIA T3 depending on configuration)  is a compact coolant heating system for use in North American hazardous…

read more

A compact UL C/US combination oil and coolant heating system for North American hazardous locations designed to maintain engine temp-front view.

HOTSTART's OCSE (UL C/US listed; Class 1, Div. 2, Group D, T3 or Class 1, Zone 2, Group IIA T3 depending on configuration)  is a compact combination oil and coolant heating system for use in North…

read more